WIFI-LD

Patented Leak Detection Delivered Via Wi-Fi

Whether you’re using a WiNG-MGR or a BMS system, the WIFI-LD allows you to leverage your existing Wi-Fi network to monitor for conductive fluid leaks in your facility.

The WIFI-LD continuously monitors your facility – it checks for leaks and ensures cable continuity once every minute and sends a packet immediately after detecting an alarm condition.

The WIFI-LD can be used in the following configurations:

With one SD-Z1 spot detector
With one SD-Z and up to 50 feet of leak detection sensing cable
With up to 100 feet of leak detection sensing cable

Integrates With Your Monitoring Systems

The WIFI-LD populates seamlessly into the WiNG-MGR’s user interface.
If you’re using a BMS, the WIFI-LD transmits leak status information via a UDP packet to your BMS.

Wireless And Battery Powered

RLE’s Wi-Fi sensors are compact and unobtrusive, yet provide an industry leading battery life – WIFI-LD sensor batteries will last up to FIVE with transmission every five minutes. No wires are required for power; no wires are required for transmission.

Designed With Security In Mind

Only allows one-way communications.
Supports WPA/WPA2‑PSK encryption.
Encrypted data storage for network and configuration information.

Available Configurations

WIFI-LD-LC: Wi-Fi wireless transmitter for use with RLE leak detection sensing cable; includes LC-Kit; requires SC, SC-R, SC-ZH or SD-Z; requires USB-A to Micro B cable for configuration
WIFI-LD-M: Wi-Fi wireless transmitter for use with RLE chemical sensing cable; includes LC-Kit-M; requires SC-C; requires USB-A to Micro B cable for configuration
WIFI-LD-SPOT: Wi-Fi wireless transmitter for use with RLE spot detector; includes SD-Z1; requires USB-A to Micro B cable for configuration

Key Features

Monitors for and detects conductive fluid leaks in any facility
Transmits on your existing Wi‑Fi network
Supports DHCP or static IPv4 addresses and static IPv6 addresses
Configurable transmission rate
Affordability and reliability that are second to none

WIFI-LD Specifications

Power: 7.2V (two 3.6V AA lithium batteries)

Battery Life: Battery life varies based on Wi-Fi signal strength and access point performance

IPv4: Up to 5 years at 5 minute transmission intervals; up to 2 years at 1 minute transmission intervals
IPv6: Up to 3.5 years at 15 minute transmission intervals

Shelf Life: 10 years in quiescent mode with battery installed

Connectivity

Wi-Fi: 2.4 Ghz 802.11b/g/n, supports WEP, WPA (TKIP) or WPA2 (AES) encryption
IPv4: Static or DHCP
IPv6: Static

Transmission Interval: 1-30 minutes (configurable)

Operating Environment

Temperature: -13ºF to 185ºF (-25ºC to 85ºC)
Humidity: 0% to 90% RH (Non-condensing)
Altitude: -200 ft to 15,000 ft (-70m to 4572m)

Mounting: Free standing, zip ties, screw and keyhole – spaced 2.5” (6.4cm), junction box – 2 screws spaced 3.28” (8.3cm)

Dimensions and Weight: 4.4”L x 2.5”W x 1.5”H (11.2cmL x 6.4cmW x 3.8cmH), 0.2lb (0.10kg)

Certifications and Standards: EN-61326-1:2013, EN 301 489-1 V2.1.1, EN 301 489-17 V 3.1.1, Subpart B of Part 15 of FCC Rules for Class A digital devices, ANSI/UL 61010-1:2012, CAN/CSA-C22.2 No. 61010-1:2012 (3rd Edition), EN 61010-1:2010 (3rd Edition), and IEC 61010-1:2010. Contains FCC ID: Z64-CC3220MOD; Contains IC: 451I-CC3220MOD