Monitor Temperature And Humidity Via Your Wi-Fi Network
Whether you’re using a WiNG-MGR or a BMS system, the WIFI-TH allows you to leverage your existing Wi-Fi network to monitor environmental conditions in your facility.
- WIFI-TH readings populate seamlessly into the WiNG-MGR’s user interface, which also provides an optional calculated dew point reading.
- If you’re using a BMS, the WIFI-TH transmits temperature and humidity information via a UDP packet to your BMS.
Wireless And Battery Powered
RLE’s Wi-Fi sensors are compact and unobtrusive, yet provide an industry leading battery life – sensor batteries will last up to SEVEN years at room temperatures.
No wires are required for power; no wires are required for transmission.
Designed With Security In Mind
- Only allows one-way communications.
- Supports WPA/WPA2‑PSK encryption.
- Encrypted data storage for network and configuration information.
Key Features
- Transmits on your existing Wi‑Fi network
- Supports DHCP or static IPv4 addresses and static IPv6 addresses
- Configurable transmission rate
- Optional calculated dew point when used with the WiNG‑MGR
- Affordability and reliability that are second to none
WIFI-TH Specifications
Power: 7.2V (two 3.6V AA lithium batteries)
Battery Life: Battery life varies based on Wi-Fi signal strength and access point performance
- IPv4: Up to 7 years @ 5 minute transmission intervals; up to 2 years @ 1 minute transmission intervals
- IPv6: Up to 5 years @ 15 minute transmission intervals
Shelf Life: 10 years in quiescent mode with battery installed
Connectivity
- Wi-Fi: 2.4 Ghz 802.11b/g/n, supports WEP, WPA (TKIP) or WPA2 (AES) encryption
- IPv4: Static or DHCP
- IPv6: Static
Transmission Interval: 1-30 minutes (configurable)
Accuracy
- Temperature: +/- 0.2°C at room temperature; +/- 0.5°C over full operating range
- Humidity: +/- 2% over full operating range
Operating Environment
- Temperature: -13ºF to 185ºF (-25ºC to 85ºC)
- Humidity: 0% to 90% RH (Non-condensing)
- Altitude: -200 ft to 15,000 ft (-70m to 4572m)
Mounting: Free standing, zip ties, screw and keyhole – spaced 2.5” (6.4cm), junction box – 2 screws spaced 3.28” (8.3cm)
Dimensions and Weight: 4.4”L x 2.5”W x 1.5”H (11.2cmL x 6.4cmW x 3.8cmH), 0.2lb (0.10kg)
Certifications and Standards: EN-61326-1:2013, EN 301 489-1 V2.1.1, EN 301 489-17 V 3.1.1, Subpart B of Part 15 of FCC Rules for Class A digital devices, ANSI/UL 61010-1:2012, CAN/CSA-C22.2 No. 61010-1:2012 (3rd Edition), EN 61010-1:2010 (3rd Edition), and IEC 61010-1:2010. Contains FCC ID: Z64-CC3220MOD; Contains IC: 451I-CC3220MOD
Product Documentation Links
Technical Resources
You may need to install a driver on your computer to communicate with the WIFI sensor. If your computer prompts you to install a driver, you can find the appropriate VCP driver here:
https://www.ftdichip.com/Drivers/VCP.htm
